Faulty Charger or Cable
USB C cables and MagSafe connectors wear out. Always rule this out first.

MacBook Guide
A MacBook that will not start is worrying, but many cases are a flat battery, a charger fault or a MacBook that is actually on with a dark screen. This guide covers the checks for MacBook Air and MacBook Pro, with separate steps for Apple silicon and Intel models.
Read the Clues
Press the power button or Touch ID key and listen. Many recent MacBooks have no startup chime and no fan noise, so it can be hard to tell.
Press the Caps Lock key. If its light comes on, the MacBook is running and the problem is the screen, not the power.
Try a different power socket, a different USB C port and, if possible, another Apple charger and cable. A faulty cable is a common cause.
A completely flat MacBook may need 10 to 15 minutes on the charger before it responds.
Caps Lock light. Means the MacBook is running.
Keyboard backlight. Another sign of life.
MagSafe light. Amber charging, green full.
Any sound. Fan or startup chime.
First Steps
These steps are safe and do not erase anything.
Connect a known good charger and leave it for at least 15 minutes.
Press and hold the power or Touch ID button for 10 seconds, release, then press once.
On Intel MacBooks with a T2 chip, hold Control, Option and Shift for 7 seconds, then add the power button for another 7 seconds. Apple silicon models do not need this.
On Apple silicon, hold the power button until Loading startup options appears. This confirms the Mac is working.
Black Screen
If the Caps Lock light works, the MacBook is running. Try these before assuming the screen has failed.
Press the brightness up key several times.
If a picture appears on a monitor or TV, the MacBook works and the internal screen or cable needs repair. See MacBook screen repair.
Type your password and press Return. Sometimes the screen wakes after login.
M1, M2, M3 and later. No SMC reset needed.
2018 to 2020 models. Use the T2 SMC reset.
On the bottom case, starting with A.
Your devices list shows each Mac’s model.
Common Causes
The common causes, from simple to serious.
USB C cables and MagSafe connectors wear out. Always rule this out first.
A deeply discharged or worn out battery may refuse to start the Mac. See MacBook battery replacement.
The MacBook is running but the screen or backlight has failed.
Spills often cause problems days later as corrosion spreads. See liquid damage help.
An interrupted update can leave the Mac stuck. A revive or restore may be needed.
Failed power components on the board. This needs board level repair.
Apple Tools
Apple builds in some recovery options that work even when macOS will not load.
From startup options, Recovery lets you run Disk Utility First Aid and reinstall macOS without erasing data.
Hold the power button into startup options, then press Command and D to test the hardware.
If an update failed, a revive from another Mac can repair the firmware without erasing data. This is advanced, and we can do it for you.
Erasing the Mac to fix it. Try recovery options first.
Cheap unbranded chargers. They can damage the charging circuit.
Charging after a spill. Power can spread the damage.
Pressing on a raised trackpad. It may be a swollen battery.
Prevention
Simple habits that prevent most startup problems.
A backup turns a dead MacBook from a crisis into an inconvenience.
Keep the charger connected during macOS updates.
Replace the battery when macOS says Service Recommended.
Liquid is one of the most common causes of MacBook board failure.
Getting Help
If a known good charger, a 15 minute charge and a force restart have not worked, or there are signs of liquid damage, it needs testing.
Our MacBook repair Melbourne service tests the charger, battery, screen and logic board, and quotes before any repair. If your MacBook is under AppleCare, check that first.
Model and year. From the bottom case or Apple ID.
What you have tried. Charger, restarts and resets.
Any spills or drops. Even small ones.
Common Questions
Quick answers for MacBooks that will not turn on.
The charger, cable or port may be faulty, the battery may be deeply discharged, or the MacBook may be on with a black screen. Check the Caps Lock light and try another charger.
Only Intel MacBooks have an SMC reset. On T2 models, hold Control, Option and Shift for 7 seconds, then add power for 7 more seconds. Apple silicon Macs reset this automatically on restart.
Not usually. Most faults do not affect the storage. On newer MacBooks the storage is built in, so getting the MacBook working again is the way to recover the data.
Often, if it is dried and assessed quickly. Do not charge or power it on after a spill.
It depends on the cause. A charger or battery costs much less than a logic board repair. We diagnose it and quote first.
Summing Up
Start with the charger and a 15 minute charge, then force restart, and on Intel models reset the SMC. Check the Caps Lock light to rule out a black screen. If nothing works, a technician can test the battery and logic board safely.
Bring it to a Melbourne technician for testing. You get a quote before any repair starts.