NBN or Provider Outage
The modem has lost its connection upstream. Nothing at home will fix it.

Network Guide
Full WiFi bars but nothing loads is one of the most common home tech problems. It means your device is talking to the modem, but the modem is not getting a working connection to the internet, or your device has the wrong network settings. This guide shows how to tell which, and fix it.
Read the Clues
Check a phone or another computer on the same WiFi. This one test tells you where to look.
If every device has no internet, the problem is the modem, the NBN connection or your provider. If only one device is affected, the problem is that device’s settings or drivers.
Focus on the modem and NBN steps below, and check your provider’s outage page from your phone’s mobile data.
Skip to the device fixes: forget the network, reset network settings and update drivers.
Other devices. Working or not.
Modem lights. Especially internet or WAN.
NBN box lights. If you have one.
Provider outages. Check with mobile data.
First Steps
Start with the modem, then move to your device.
Turn the modem off at the wall, and the NBN box if you have one, wait 30 seconds, then turn the NBN box on first and the modem second. Wait three minutes.
If the modem’s internet or WAN light is red or off, the connection to your provider is down. Call your provider.
On the affected device, forget the WiFi network and reconnect with the password.
On Windows, use Settings, Network and internet, Advanced network settings, Network reset. On a Mac, remove and re-add the WiFi service in Network settings.
Windows Fixes
If only a Windows computer is affected, these commands in Command Prompt as administrator often fix it.
Type ipconfig /release then ipconfig /renew. This asks the modem for a fresh network address.
Type ipconfig /flushdns to clear stored website addresses that may be stale.
Type netsh winsock reset, then restart the computer.
Disconnect it and test again.
Should usually be off at home.
Wrong time breaks secure websites.
Temporarily disable to test.
Common Causes
These are the usual causes in Australian homes.
The modem has lost its connection upstream. Nothing at home will fix it.
Modems run for months and eventually stop routing traffic properly.
Your device cannot look up website addresses. Changing DNS often fixes it.
Two devices given the same address, so one loses its connection.
Common after Windows updates on laptops. See laptop won’t connect to WiFi.
A VPN or firewall blocking traffic.
DNS
If websites fail but the connection otherwise works, changing DNS can help.
DNS turns website names into addresses. If your provider’s DNS has problems, sites will not load even though you are connected.
Cloudflare at 1.1.1.1 and Google at 8.8.8.8 are widely used alternatives.
Change it on the modem to fix every device, or on one computer to test first.
Factory resetting the modem first. You lose your provider settings.
Buying a new modem straight away. Most faults are not the modem.
Ignoring a red internet light. That is your provider’s problem to fix.
Random driver download sites. Use the laptop maker’s website.
Prevention
A few steps make home internet more reliable.
Updates fix bugs that cause dropouts.
Central, open and away from microwaves and mirrors.
A monthly restart keeps older modems running smoothly.
Larger homes benefit from mesh systems for even coverage.
Getting Help
If your provider says the line is fine but devices still connect without internet, the modem settings or home network need a closer look.
Our WiFi and network setup Melbourne service tests the modem, NBN connection and devices on site and fixes the cause.
Internet provider. And modem model.
Which devices are affected. One or all.
Modem light colours. A photo helps.
Common Questions
Quick answers for connected but no internet problems.
Your device is connected to the modem, but the modem has no working internet connection, or your device has a DNS or address problem. Check whether other devices work to narrow it down.
Restart the modem, forget and rejoin the network, run ipconfig /release, ipconfig /renew and ipconfig /flushdns, then try Network reset in Settings.
If the modem’s internet light is red or off, or every device is affected after a restart, contact your provider. If only one device is affected, it is that device.
A restart often does. A factory reset erases your provider settings, so only do that if your provider asks you to.
Yes. See our WiFi setup Melbourne page for on-site help.
Summing Up
Check whether one device or all are affected. Restart the modem properly, check the internet light, then fix the affected device’s network settings. If it keeps happening, the modem or home network needs a proper look.
Book an on-site network visit anywhere in Melbourne. Quote before work starts.