0480 080 288 Mon–Sat · Same Day Service
All Melbourne Suburbs No Fix No Fee

Windows Audio Guide

Sound Not Working on Windows? How to Get Audio Back

Sound not working on Windows is one of the most common problems we fix, and it is usually a setting rather than broken hardware. In most cases Windows has simply switched to the wrong output, or an update has upset the audio driver. This guide works through the checks in the order we use them, so you can get sound back on a Windows 11 or Windows 10 laptop or desktop without guessing.

  • Windows 11 and 10
  • Laptops and Desktops
  • Realtek and HDMI Audio
  • No Software to Buy

Is the Sound Gone Everywhere or Only in One App?

Before changing anything, work out how wide the problem is. Play a YouTube video, then play a sound file, then open the volume flyout and tap the slider. If sound is missing in every app, the fault is in Windows settings, the driver or the hardware. However, if only one app is silent, the problem sits inside that app or the Volume mixer.

Next, try a pair of wired headphones. If the headphones work but the speakers do not, the speakers, their cable or the output selection is to blame. On the other hand, if neither works, the driver or the audio service is the more likely cause.

Finally, think about what changed. A Windows update the night before, a new Bluetooth speaker or a TV connected by HDMI are the three most common triggers we see. Knowing the trigger often points straight to the fix.

Check for a Red Cross on the Speaker Icon

A red cross next to the speaker icon in the taskbar means Windows cannot find a working audio device. That points to a driver problem or a disabled device rather than a muted setting.

Watch the Volume Bar Move

Open the sound settings and play something. If the volume bar moves, Windows is sending sound, so the problem is the speakers, the cable or the chosen output.

What to Look For

  • Red cross on the speaker icon. Driver or device problem.

  • Volume bar moving. Windows is sending sound somewhere.

  • Headphones work. Speakers or output selection at fault.

  • Only one app silent. Check the Volume mixer.

What Should You Check First When the Sound Stops?

These quick checks fix most sound problems in a few minutes. Work through them in order before moving on to drivers.

  1. Check Mute and Volume

    Press the volume up key and check the mute key, which is often F1 or a key with a crossed speaker. Then click the speaker icon in the taskbar and make sure the slider is above zero.

  2. Choose the Right Output

    Open Settings, then System, then Sound. Under Output, pick your speakers or headphones. Windows often switches to a TV or a Bluetooth device without telling you.

  3. Restart the PC

    A full restart reloads the audio driver and the audio service. Use Restart rather than Shut down, because Fast Startup can keep the old driver state.

  4. Run the Audio Troubleshooter

    Search for Get Help in the Start menu and run the audio troubleshooter. It checks the service, the device and common settings automatically.

How Do You Fix Windows Sound When the Quick Checks Fail?

If the quick checks have not worked, the cause is usually the audio service, the driver or an enhancement setting. Try these next.

Restart the Windows Audio Service

Press Windows and R together, type services.msc and press Enter. Find Windows Audio, right click it and choose Restart. Also check that its startup type is Automatic, because a disabled service means no sound at all.

Update or Roll Back the Driver

Right click Start and open Device Manager. Expand Sound, video and game controllers, then right click your audio device. If sound stopped after an update, open Properties and choose Roll Back Driver. Otherwise, choose Update driver, or download the latest audio driver from your laptop maker.

Turn Off Audio Enhancements

Open the sound settings, select your speakers and switch Audio enhancements off. Enhancements from Realtek and other makers sometimes clash with Windows updates and silence the output.

Change the Sample Format

Press Windows and R, type mmsys.cpl and press Enter. Open your speakers, then the Advanced tab, and choose a different format such as 24 bit, 48000 Hz. Click Test after each change.

Handy Shortcuts

Windows and I

Opens Settings directly.

Windows and R

Opens Run for services.msc and mmsys.cpl.

Windows and Ctrl and V

Opens the sound output picker on Windows 11.

Right click the speaker icon

Opens the Volume mixer and sound settings.

Why Is My Sound Not Working on Windows?

These are the causes we find most often when a Windows PC goes quiet.

Wrong Output Device

Windows has switched to a monitor, a TV or a Bluetooth headset. In fact, this is the single most common cause and takes seconds to fix.

Driver Problem After an Update

A Windows update has replaced or broken the Realtek, Intel or AMD audio driver. Rolling back or reinstalling the driver usually fixes it.

Stopped Audio Service

The Windows Audio service has crashed or been disabled, so nothing can play sound until it starts again.

Enhancement Conflict

Audio enhancements or a maker’s sound app clash with the driver. As a result, the output is silent or crackles.

Faulty Headphone Jack

A worn jack can make Windows think headphones are always plugged in, so the speakers stay muted.

Failed Speaker or Sound Chip

Liquid, a drop or wear can damage the speakers or the audio chip on the board. This needs a repair rather than a setting change.

Which Windows Tools Help Find the Sound Problem?

Windows already includes everything you need to find most audio faults, so there is no need to download extra software.

Volume Mixer

Right click the speaker icon and open the Volume mixer. Each app has its own slider, so one app can be muted while the rest work.

Device Manager

Shows whether the audio device is installed, disabled or showing an error. A yellow warning sign means the driver needs attention.

Sound Control Panel

Type mmsys.cpl in Run to reach the classic panel. Here you can set the default device, test each output and change the sample format.

Things to Avoid

  • Driver download sites. Use Windows Update or your laptop maker only.

  • Registry cleaners. They can remove audio settings and cause more problems.

  • Turning up the volume on a crackle. It can damage small laptop speakers.

  • Using the laptop after a spill. Switch it off and get it checked.

Why Is There No Sound Through HDMI or Bluetooth?

When you connect a TV or monitor by HDMI, Windows often sends the sound to that screen. If the TV is muted or the monitor has no speakers, the sound seems to disappear. Therefore, the fix is to open the sound settings and choose your laptop speakers again, or to turn up the volume on the TV itself.

Bluetooth causes similar confusion. A pair of earbuds in your bag can reconnect on their own, and Windows then plays everything through them. For this reason, it is worth turning Bluetooth off for a moment while you test the speakers. If the sound returns, remove the earbuds from the paired list and pair them again later.

No Sound From the TV

Check that the TV is on the right input and not muted. Then, in Windows, select the TV in the output list. If it does not appear, update the graphics driver, because HDMI audio is handled by the Intel, AMD or NVIDIA graphics driver rather than the sound driver.

Bluetooth Headphones Connected but Silent

Remove the device in Settings, restart the PC and pair it again. Also, check that the headphones are chosen as the output and that their own volume is up.

How Can You Tell if the Speakers Have Failed?

Once the settings and drivers check out, it is time to test the hardware. A simple way is to plug in a pair of headphones that you know work. If they play clearly but the speakers stay silent or crackle, the speakers or their cable are the likely problem.

Similarly, you can start the laptop into its BIOS or a maker’s diagnostic tool. Dell, HP and Lenovo laptops all include audio tests in their built in diagnostics. If the test sound does not play there, Windows is not the cause, because the diagnostics run before Windows loads.

Finally, look for signs of damage. A laptop that had a drink spilled near the keyboard often loses its speakers first. In that case, it is best to stop using it and get it checked, since liquid keeps spreading inside the case.

How Do You Stop Windows Sound Problems Coming Back?

A few habits keep the sound working and make the next problem easier to fix.

Keep Drivers From the Maker

Install audio drivers from Windows Update or your laptop maker’s support site. Generic drivers from download sites cause many repeat problems.

Name Your Devices

In the sound settings, rename outputs to things like Laptop speakers and Living room TV. As a result, picking the right one later is much easier.

Create a Restore Point

Before big updates, make a restore point. If an update breaks the sound, System Restore can undo it in a few minutes.

Protect the Headphone Jack

Pull plugs out straight rather than at an angle. A bent jack is a common cause of speakers that stay muted.

When Should You Get Help With No Sound on Windows?

If you have tried the steps above and there is still no sound, the cause may be a damaged jack, a failed speaker or a fault on the board. Equally, a stubborn driver problem can take hours to untangle without the right tools.

Our technicians can test the audio hardware and drivers quickly and tell you exactly what has failed. You can bring the PC in, or we can often fix driver and settings problems through our remote IT support service. For laptops with damaged speakers, see our laptop board repair page.

What to Share

  • Make and model. From the sticker or System Information.

  • When it stopped. After an update, a spill or a new device.

  • What you have tried. So we do not repeat it.

Windows Sound Questions Answered

Quick answers for common audio problems on Windows 11 and Windows 10.

Why did my sound stop working after a Windows update?

Updates sometimes replace the audio driver with a generic version. Open Device Manager, find your audio device and choose Roll Back Driver, or install the latest driver from your laptop maker.

Why does my laptop say headphones are plugged in when they are not?

The headphone jack may be worn or have debris in it, so Windows thinks a plug is inserted. Try inserting and removing a plug a few times. If it continues, the jack needs repair.

How do I reset sound settings in Windows 11?

Open Settings, then System, then Sound, then Volume mixer, and choose Reset. This sets every app back to the default device and volume.

Why is there no sound from my HDMI TV?

Windows needs the TV chosen as the output, and HDMI sound relies on the graphics driver. Select the TV in the sound settings and update the graphics driver if it is missing.

Can a virus stop my sound working?

It is rare, but malware can disable services. If the audio service keeps stopping, run a full scan. Our virus removal service can help if the problem continues.

Is it worth repairing laptop speakers?

Usually yes. Speakers are a modest part on most laptops, and a repair costs far less than a new laptop.

Getting Your Windows Sound Back

In most cases, sound not working on Windows comes down to the wrong output device, a stopped service or a driver problem. Start with the mute key and the output list, then restart the audio service and check the driver. After that, turn off enhancements and try a different sample format.

If the sound still does not return, test with headphones and the maker’s diagnostics. That tells you whether the hardware has failed. At that point, a technician can confirm the fault and quote the repair before any work starts.

Still No Sound on Your PC?

Call us and we will help you work out whether it is a setting, a driver or a hardware fault.