Windows Accessibility Settings
Filter Keys or Sticky Keys has been switched on, often by holding Shift for too long. As a result, keys seem slow or dead.

HP Laptop Guide
An HP laptop keyboard not working usually has a simple cause, and many HP keyboard faults are fixed without opening the laptop. A Windows setting, a stuck driver or the HP power reset can all bring dead keys back. This guide covers Pavilion, Envy, Spectre, Victus, OMEN and EliteBook models, and shows you how to use HP’s own diagnostics to check whether the keyboard itself has failed.
Read the Clues
The pattern of the fault tells you a lot. If the entire keyboard has stopped, the cause is usually a setting, a driver or a loose cable. However, if only a few keys fail, or a whole row stops, a spill or a damaged keyboard is more likely.
Next, plug in a USB keyboard. If it types normally, Windows is working and the fault is limited to the built in keyboard. In addition, a USB keyboard lets you type passwords while you troubleshoot.
Also notice whether keys type the wrong characters. Letters that come out as numbers, or symbols in the wrong place, point to Num Lock or the keyboard language rather than a hardware fault.
If keys only work when held for a second, Filter Keys is probably switched on in Windows.
If the keys work in the BIOS but not in Windows, the hardware is fine and the problem is software.
Whole keyboard dead. Setting, driver or cable.
A row of keys dead. Liquid or keyboard damage.
Wrong characters. Num Lock or language setting.
Slow to respond. Filter Keys switched on.
First Steps
These steps fix a large share of HP keyboard problems. Use the touchpad and the on screen keyboard if you cannot type.
Choose Restart from the Start menu. A full restart reloads the keyboard driver and clears many temporary faults.
Shut down, unplug the charger and any accessories, then hold the power button for 15 seconds. Reconnect the charger and start the laptop normally.
Open Settings, then Accessibility, then Keyboard. Switch off Filter keys, Sticky keys and Toggle keys.
Open Settings, then Time and language, then Language and region. Make sure your usual layout, such as English Australia, is at the top.
Driver and BIOS
If the keyboard is still not working, check the driver, then test the keyboard outside Windows.
Right click Start, open Device Manager and expand Keyboards. Right click Standard PS2 Keyboard or HID Keyboard Device, choose Uninstall device and restart. Windows installs it again automatically.
Fast Startup can keep a broken driver state between shutdowns. Search for Choose what the power buttons do, click Change settings that are currently unavailable and untick Turn on fast startup.
Restart and tap F10 to open the HP BIOS. Use the arrow keys to move around. If they work there, the keyboard hardware is fine.
HP Support Assistant can install BIOS and chipset updates, which sometimes fix keyboard faults after a Windows update.
Opens the HP Startup Menu.
Runs HP PC Hardware Diagnostics.
Opens the BIOS setup.
Stops letters typing as numbers.
Common Causes
These are the causes we find most often on HP laptops.
Filter Keys or Sticky Keys has been switched on, often by holding Shift for too long. As a result, keys seem slow or dead.
A Windows update or a crash has left the keyboard driver in a broken state. Reinstalling it usually fixes this.
The laptop’s controller has locked up. The HP hard reset clears it and is worth trying early.
Even a small spill can stop rows of keys working days later. See our liquid spilled on laptop guide.
The keyboard connects to the board with a thin cable that can work loose after a drop.
Heavy use wears out key switches, especially on keys like Space, Enter and the letters you use most.
HP Tools
HP includes several tools that make keyboard faults easier to pin down and fix.
Checks for driver, BIOS and firmware updates for your exact model, and links to warranty details.
Tests the keyboard and other parts outside Windows. Press F2 at startup to run it.
Click the accessibility icon on the sign in screen to type your password without the physical keyboard.
Turning on a wet laptop. Dry and assess first.
Prying off keycaps. The clips break easily.
Generic driver sites. Use HP or Windows Update only.
Spraying cleaner into the keys. Use short bursts of air.
HP Diagnostics
HP builds a hardware test into most of its laptops, and it runs outside Windows. Therefore, it gives a clear answer about whether the keyboard itself has failed. To use it, shut the laptop down, then turn it on and tap F2 straight away.
When HP PC Hardware Diagnostics opens, choose Component Tests, then Keyboard. The test asks you to press each key in turn and marks the ones that register. If several keys fail the test, the keyboard needs replacing or the cable needs reseating.
On the other hand, if every key passes, the hardware is working. In that case, go back to the Windows settings and driver steps, because the problem is in the software.
Press Esc at startup to open the HP Startup Menu, then choose System Diagnostics from the list. If the keyboard does not respond here either, use a USB keyboard to reach the menu.
Action Keys
Many HP laptops come with action key mode switched on. This means the top row controls brightness, volume and media by default, and you hold Fn to get F1 to F12. If you expect the opposite, the keys can seem broken.
On many HP models, you can change this in the BIOS. Restart, press F10, and look for Action Keys Mode under System Configuration. Switch it to suit the way you work, then save with F10. Some newer models also let you swap the behaviour with an Fn lock key, so check the keys for a small padlock icon.
Similarly, if the keyboard backlight seems dead, check the backlight key, which is often F4, F5 or F9 on HP laptops. Not every model has a backlight, so check your specifications first.
Some Keys Only
When only a few keys fail, the pattern helps narrow down the cause. A single key that feels mushy or sticky usually has debris under it. Therefore, tilt the laptop and use short bursts of compressed air around that key before trying anything else.
In contrast, a whole row or a group of keys in the middle often points to liquid. Spills can take days to cause problems, because the residue slowly damages the thin circuit layers inside the keyboard. If you remember a spill, stop using the laptop and get it checked.
Similarly, if the number keys on the right type nothing, check Num Lock. On HP laptops with a number pad, Num Lock must be on for those keys to type digits. Otherwise, they act as arrow and page keys instead.
HP warranty usually covers keyboard faults that are not caused by damage. Therefore, check your warranty status in HP Support Assistant before paying for a repair. Spills are normally excluded unless you have accidental damage protection.
Prevention
Simple habits prevent most repeat keyboard faults.
Spills are the most common cause of dead keys we see. Use a cup with a lid near the laptop.
Tilt the laptop and use short bursts of compressed air between the keys every few months.
Run HP Support Assistant regularly, so BIOS and driver fixes are installed before they cause trouble.
Lift the laptop from the base rather than the screen, which reduces stress on internal cables.
Getting Help
If HP diagnostics show failed keys, or the keyboard stopped after a spill, the keyboard or its cable needs attention. On many Pavilion and Envy models, the keyboard is part of the top case, so the repair takes more care than simply swapping a part.
Our HP laptop repair Melbourne service tests the keyboard and cable and gives you a quote before any work starts. For other brands, see our laptop keyboard repair page.
Model number. From the sticker underneath.
Which keys fail. All, a row or a few.
Any spill or drop. And when it happened.
Touchpad trouble too? See laptop touchpad repair.
Common Questions
Quick answers for HP laptop owners with keyboard trouble.
Check that Filter Keys and Sticky Keys are off in the accessibility settings, and that Num Lock is not making letters type numbers. Then restart the laptop.
This usually points to the keyboard driver, a setting or the keyboard cable. Reinstall the driver and test the keyboard in HP diagnostics.
Do the HP hard reset by unplugging everything and holding the power button for 15 seconds. Then reinstall the keyboard driver in Device Manager.
Num Lock or the keyboard language is usually to blame. Check that your usual layout is first in the language settings.
Yes, occasionally. Reinstall the driver, turn off Fast Startup and install HP’s latest BIOS through HP Support Assistant.
On most models, yes. A keyboard repair costs far less than a new laptop and keeps all your files in place.
Summing Up
In most cases, an HP laptop keyboard not working is fixed by a restart, the HP hard reset or turning off Filter Keys. After that, reinstall the driver and test the keyboard in the BIOS and HP diagnostics.
If the diagnostics show failed keys, or the problem started after a spill, the keyboard needs repair. At that point, a technician can confirm the fault and quote the job before any work begins.
Call us and we will help you find out whether it is a setting, a driver or the keyboard itself.